FM Tuner - Triode Tube FM Tuner






FM Tuner Triode Tube FM Tuner

 
click here to register

fm tuner

fm tuner - triode tube fm tuner

The MD 106T
triode tube fm tuner

FM Tuner - the MD-106T Triode Tube FM Tuner

larger view   

Introduced in 2003, the MD 106T FM Tuner is one of our flagship products here at Magnum Dynalab. As the original offering in our successful series of Hybrid FM tuners, the MD 106 Triode is the first of Magnum Dynalab's FM tuners to use tube technology in the audio amplification stage. Consistent with our design philosophy to separate the analog R.F. section and the audio section, the MD 106T FM Tuner provides a Magnum tuner for those customers with a special partiality for the tube experience.

Like all Magnum Dynalab tuners, the MD 106T FM Tuner employs an in-house designed and manufactured analog front end that utilizes a specially aligned five stage front end with precise hand-matched components in the critical areas. In any FM tuner, the front end is of most importance to maximizing sensitivity and selectivity while minimizing distortion, so that the signal sent to the audio section is as pure as possible. It is for this reason that our front ends are designed and built by us, for only us. There is no company in the world that does so, nor is there a company that we can count on to deliver a front end worthy of inclusion in our devices.

Further, the 106T FM Tuner is also the beneficiary of the unique Magic Eye Tuning meter, providing an accurate and elegant tuning mechanism to ensure the perfect frequency is fed through the tuner's front end. Overall, the stately symmetry of the 106T FM Tuner bestows a little mood lighting while in service, and is a testament to the outstanding sonic clarity, definitive sound staging and raw finesse of a truly fine audio product.

 

FM Tuner - the MD-106T Triode Tube FM Tuner

FM Tuner
  • Tunable five stage ANALOG front end: Five stages of RF filtration, providing station separation without affecting stereo separation. As always, the front end is a custom designed and manufactured in-house design.

  • Magic Tuning Eye: Embedded in faceplate for the most precise and accurate center tuning

  • Multiple Bandwidth Settings: The MD 106T FM Tuner offers both Ultra Wide and Narrow IF Bandwidth settings to produce the best SOUND where adjacent channel interference is, or is not a factor.

  • Dual AGC (automatic gain control) stage: This automatic circuit design eliminates the need for a local and distant switch, altering the amount of relative gain that's added to the incoming signal.

  • Auto Blend RF Circuit: Automatically monitors and adjusts stereo separation to maximize "stereo quieting", insuring the quietest stereo signal as possible. This greatly eliminates background noise.

  • Precision tunable matched IF (intermediate frequency) amplifiers -- ensures consistent specifications for adjacent channel separation, alternate channel separation and low distortion

  • Precision Voltage Stabilizers in the Power Supply: Ensures precise tuning of the incoming RF signal

  • Dual Antenna Inputs: Provides the flexibility to position different antennas in multiple locations to accommodate differing incoming signals.

  • Defeatable Mute: Eliminates any interstation noise while tuning

  • Analog Meters: Functional and easy-to-read multipath and signal strength measurements showcased on the large faceplate.

  • Fully shielded RF section-eliminates any interference from stray signals


To complement this world class R.F. section, Director of Design Zdenko Zivkovic has designed a world class triode audio section to perform at the same high level our customers have come to expect from Magnum Dynalab products. Specifically, we have paid special attention to three critical areas of the design.

 

  1. First and the most important, we achieve a complete grounding circuit to remove all stray ground path signals that alter the micro-information as it moves through the device, allowing the listener to grasp the full emotion of the music.

  2. Secondly, the design of the power supply utilizes a special path and high-grade components, which eliminates any ripple effect from the AC source that would interfere with the nuances in the music.

  3. Lastly but no less important is the zero feedback design that does not alter the original waveform. Our design team consists of music lovers, and the design in the 106's audio section allows our customers to feel the same passion for the music as the creator of the original recording.

In addition to our primary design criterion, the MD 106T FM Tuner features a variety of design features in the audio stage and power supply that complement the R.F. section. It is a product designed and manufactured with great precision and care, with specific standards for all components included in the device. Whether it is the exacting specifications required for each MD Reference 6922 tube, or the specific thickness of each circuit board inside the device, the MD 106T FM Tuner is an audio product for the most discerning of customers.

  • MD Reference 6922 Vacuum Tubes: Included in the audio amplification stage, our 6922 MD Reference Tubes are designed to our exacting standards and tested individually for specifications. Each tube is fitted with Pearl Coolers, maintaining constant temperatures to ensure maximum performance under a variety of operating conditions.

  • .093 Thick Printed Circuit Board: A solid footing to minimizes any residual vibration in the chassis to allow all components to operate at peak performance. Further, all contact points are generously gold plated to ensure complete signal transfer over the long haul.

  • Balanced Output with Gold Plated Neutrik Connectors: Fully complimentary circuit insures a perfectly balanced signal, and exact dimensions ensure maximum conductivity.

  • Shielded Torroidal Transformer: Coupled with a high grade aluminum chassis, device is completely shielded from stray signals and transient noises. The high grade custom designed transformer reduces the overall noise floor of the tuner.

  • Mundorf Supreme Capacitors: Used in the bypass, creating sound purity consistent with the original signal.

  • WBT Unbalanced (RCA) Output Connectors: Low tolerance connector made of highly ductile "OFC" copper, and 24 carat gold plated ensures a solid contact for interconnects

  • Ultra Linear Capacitors in the Power Supply: Provides a pure source of DC power, and improves the frequency response of the tuner

  • Kimber Hyper-Pure Copper Wiring: High grade internal wiring provides a clean, uncolored path for the signal through the audio stage of the unit.

  • Burr Brown Op Amps with Black Gate Capacitors: Proven performance from industry leading suppliers with zero degradation over the long haul

Many people question why we are one of the only companies that continue to build a truly ANALOG FM tuner and ANALOG remote control. The answer is very simple. The best SOUND can only be produced when the signal received by the FM tuner is tuned and maintained in the ANALOG domain. By maintaining the FM signal in the ANALOG domain the customer has infinite tuning across the FM band; this is achieved by the use of a knob instead of the pushbutton step function tuning offered by a digital tuner. Because of our design and manufacturing process, the front end and the IF (intermediate frequency) amplifiers are precision aligned, which guarantees that all specifications are met all the time; this is not possible in a digitally tuned tuner, as they are dependent on the tolerances of the components.

By calibrating and aligning the IF (intermediate frequency) amplifiers we are optimizing SOUND, SENSITIVITY and SELECTIVITY.



DAC upgrade for FM Tuners

It is now possible to upgrade all Magnum Dynalab tuners with our pioneering Digital-to-Analog Conversion module (or include as an option on new tuners), turning your FM tuner into a multi-functional audio device. Currently accommodating a co-axial (S/PDIF) input, you can use the proprietary analog circuitry found in all Magnum Dynalab products as a source to produce pure, transparent audio from any digital device capable of outputting a co-axial (S/PDIF) signal.

Check out our DAC UPGRADES page for more information & pricing.

 

The Precision Analog Remote System is now available as an option on all production Magnum Dynalab FM tuners, receivers and as an update to all previous Magnum Dynalab FM tuners and receivers. Click here for details on the Analog Remote for your FM Tuner.

 

 


Your Name: 


Email: 

Question/Comment: 




MD-106T FM Tuner of Magnum Dynalab     

 




 

FM Tuner Awards

2006 Editor's Choice Award

Terrific sensitivity and selectivity give the MD106T exceptional focus and soundstaging.
View the award ...


Best Tuner Award

In the category of Best Radio Tuner over £500, Magnum Dynalab took home the Gold Award for the MD-106T.
View the award ...

FM Tuner Review

We could really get used to FM radio with this tuner being part of the equation. The MD-106T provides a gorgeous sound and is worth every penny ...
Read the entire review ...

 

You are in the same room as the orchestra, you are sitting in a 17th Century drawing room or you are sitting in the lap of the newsreader. You see, it's impossible to stay dispassionate about the MD-106T, it makes the eather so tangible and visceral, you just cannot leave the airwaves alone.
Read the entire review ...

 

FM Tuner Upgrades

You can upgrade your MD-102 to the MD-106T.
Click here for FM Tuner upgrade details ...

 

Triode Tube FM Tuners

MD-108T - Triode Tube FM Tuner

MD-106T - Triode Tube FM Tuner

MD-102T - Triode Tube FM Tuner

MD-100T - Triode Tube FM Tuner

Solid State FM Tuners

MD-102 - FM Tuner

MD-100 - FM Tuner

MD-90 - FM Tuner




 








Site Map  |  Privacy Policy   |  Contact   |  Home